Small trucks carry signatures too.

The OIRAN JUNIOR — launched under the name Combo Jr. — is the compact entry in our tail lamp lineup: smaller than the COMBO MINI, sized for 1t–2t trucks and any vehicle where rear lamp space is tight. Same construction philosophy as the full-size lamps, less real estate.

What it is

A complete rear combination lamp in a 326 mm body: running light, brake light, rear turn signal and reverse light, with waterproof heat-press (thermocompression) construction — the same bonding technique used across our ECE-certified range. No separate gaskets to age, no glued seams.

Specifications

  • External dimensions (with plated bezel): W326 × H153 × D85 mm
  • Lens surface: W300 × H100 mm
  • LEDs: 136
  • Voltage: 12V / 24V
  • Functions: running, brake, rear turn signal (ECE E8 148R00-15660), reverse
  • Construction: waterproof heat-press bonding, E-mark engraved on the lamp
  • Warranty: 1 year, covering water leakage and lighting failure
  • JAN code: 4560329695715
  • Note: a rear reflector is not included — plan a separate reflector to remain street-legal.

Wiring notes

The JUNIOR installs with a plug-in harness — no cutting of factory wiring. On trucks that monitor bulb load, add resistor kit OERO-04N (24V) or OERO-04CT (12V) to prevent the bulb-failure warning and hyperflash. ESS (Emergency Stop Signal) operation is supported with the dedicated harness. New to these terms? Start with our glossary: Sequential LED taillights explained: ULA, SEA and ESS modes.

Variants and fitment

The JUNIOR comes in Red and Clear lens variants and is sold per side. Verified specifications are on the OIRAN JUNIOR product page; matching plug-in harnesses and resistors have their own showroom pages. In Japan, the JUNIOR is also available through our distributor network, including Valenti Japan and Stellar Five.

Installation is deliberately simple: with the plug-in harness, most installs finish in under an hour per side.

EU / EEA: verify local regulations before road use.

Browse all tail lamps — or contact us with your truck's model and year and we will confirm fitment before installation.